The Caddy®is already a classic power source in the mobile welding equipment field.
With the introduction of the CaddyTig 2200i AC/DC series and a full range of accessories, you will find the optimal solution for a wide range of TIG welding applications.
Offering true portability
Not only is Caddy Tig 2200i AC/DC small and of low weight. Thanks to its intelligent, compact design it is easy to take along to different indoor and outdoor worksites and also to tuck away when not used, making it handy both in the workshop and on the move.
Single-phase mains connection makes it easy to find an electricity supply for the unit, and it works equally well when powered by a portable generator. *
Thanks to the built-in PFC circuit the machine can operate with extra long mains cables, over 100 m, giving the welder a very large working radius.
Impact resistant design
Composite materials in combination with smart design solutions provide a durable and impact resistant machine, adapted to rough conditions.
The control panel is recessed, which provides additional protection and durability.
Caddy Tig 2200i AC/DC has sturdy and impact resistant cable connectors with OKC 50.
Improving the weld quality
The TA34 version is designed to support and enhance the skills of the welder and enables excellent welding results to be achieved in a wide range of materials and thicknesses.
The TA34 version comes with both adjustable slope up and slope down. It also comes with Micro Pulse functionality, making it easy to control the heat input and minimizing the heat affected zone.
This is helpful especially on thin sheets and high tense steels.
The Caddy Tig 2200i AC/DC provides true MMA capability with the same capacity and features as ESAB MMA machines of the same voltage range, including the features Hot start, arc force setting, Arc Plus II* and additionally, polarity switch.
Dimensions
Caddy Tig 2200i AC/DC, TA34 AC/DC
| Height | 345 mm |
| Length | 418 mm |
| Width | 188 mm |
Input Voltage
| Model | TA33 AC/DC | TA34 AC/DC |
| Frequency | 50/60 Hz | 50/60 Hz |
| Phase | 1 | 1 |
| Voltage | 230 V | 230 V |
Power Specifications
TA34 AC/DC
| AC Balance | 50-98 % |
| Open Circuit Voltage | 46-60/<35 V |
| Power Factor at Maximum Current | 0.99 |
| Protection Class | IP 23 |
Specifications
| Gas post flow | 0 - 25 sec |
| Gas pre flow | 0 - 5 sec |
| MCableX | 3 x 2.5 |
| Slope Down | 0 - 10 sec |
| Slope Up | 0 - 10 sec |
| Gas post flow | 0 - 25 sec |
| Gas pre flow | 0 - 5 sec |
| MCableX | 3 x 2.5 |
| Slope Down | 0 - 10 sec |
| Slope Up | 0 - 9.9 sec |
Weight
Caddy Tig 2200i AC/DC, TA34 AC/DC
Welding Output
| Model | TA33 AC/DC | TA34 AC/DC |
| Duty Cycle | 100 %
20 %
60 % | 100 %
20 %
60 % |
| Output Current | 140 A
150 A
220 A | 140 A
150 A
220 A |
| Output Voltage | 15.6 VDC
16.0 VDC
18.8 VDC | 15.6 VDC
16.0 VDC
18.8 VDC |
