Sure Cut Slice Oxy Lance Tool Box Kit With Regulator

The Oxylance Sure Cut System will cut virtually any metal, both ferrous and non-ferrous, and is faster than conventional oxy-acetylene cutting. Our system does not require preheating or cleaning the material before cutting. It is easy to use and is cost effective for most applications.

OXYGEN VOLUME & PRESSURE REQUIREMENTS

BURNING BAR DIAMETER                          OPERATING PRESSURE            CUBIC FEET PER MINUTE.540” (1.3cm) O.D. (1/4” pipe (0.6cm))   Min. 90 psi Max. 150 psi         20 cfm @ 90 psi 30 cfm @ 150 psi.625”(1.5cm) O.D. (5/8” tube (1.5cm))    Min. 90 psi Max. 150 psi         25 cfm @ 90 psi 40 cfm @ 150 psi.675” (1.7cm) O.D. (3/8” tube (0.9cm))   Min. 90 psi Max. 150 psi         30 cfm @ 90 psi 45 cfm @ 150 psi.840” (2.1cm) O.D. (1/2” pipe (1.2cm))   Min. 90 psi Max. 150 psi         60 cfm @ 90 psi 75 cfm @ 150 psi.922” (2.3cm) O.D.                                   Min. 90 psi Max. 150 psi         70 cfm @ 90 psi 85 cfm @ 150 psi1.05” (2.6cm) O.D. (3/4” pipe (1.9cm))   Min. 90 psi Max. 150 psi         80 cfm @ 90 psi 95 cfm @ 150 psi

Consists of:• Holder• 25’ (7.62 m) x 10 mm Oxygen Hose• 25’ (7.62 m) x #4 Power Lead• 25’ (7.62 m) x #4 Ground Lead w/Striker Plate• 1/4” (6.35 mm) and 3/8” (9.52 mm) Collet• 12 ea 1/4” (6.35 mm) x 24’’ (609 mm) Sure Cut Rods• 12 ea 3/8” (9.52 mm) x 24’’ (609 mm) Sure Cut Rods• 26” (660 mm) Tool Box• Requires 12 Volt Battery Power to Initiate• Oxy Regulator 452X-175-IW